11 13 Oil sump
WARNING: This page is about a different variant/trim than selected.
TIGHTENING TORQUE SPECIFICATION - OIL SUMP
| Type | Thread | Tightening specifications | Dimension | ||
|---|---|---|---|---|---|
| 1AZ | Plug Oil drain to oil sump. |
N52K | M12 x 1.5 | Replace sealing ring. | 25 Nm |
| 2AZ | ASA screw Oil sump (aluminium) to crankcase lower half. Aluminium screws/bolts are permitted with and without colour coding (blue). |
N52K | M8 x 26 | Replace screw. Thread repairs exclusively with aluminium Helicoil threaded insert. Jointing torque and angle of rotation must be observed without fail. Jointing torque |
8 Nm |
| Angle of rotation | 90 ° | ||||
| 3AZ | ASA screw Oil sump (aluminium) to crankcase lower half. Aluminium screws/bolts are permitted with and without colour coding (blue). |
N52K | M8 x 112 M8 x 92 |
Replace screw. Thread repairs exclusively with aluminium Helicoil threaded insert. Jointing torque and angle of rotation must be observed without fail. Jointing torque |
8 Nm |
| Angle of rotation | 180 ° | ||||
| 4AZ | ASA screw, microencapsulated Oil sump (aluminium) to crankcase lower half. Aluminium screws/bolts are permitted with and without colour coding (blue). |
N52K Allrad | M8 x 36 M8 x 40 |
Replace microencapsulated screw. Thread repairs exclusively with aluminium Helicoil threaded insert. Jointing torque and angle of rotation must be observed without fail. Jointing torque |
8 Nm |
| Angle of rotation | 90 ° | ||||
| 5AZ | ASA screw Oil sump (sheet metal) to crankcase lower half. Aluminium screws/bolts are permitted with and without colour coding (blue). |
N52K | M8 x 24 | Replace screw. Thread repairs exclusively with aluminium Helicoil threaded insert. Jointing torque and angle of rotation must be observed without fail. Jointing torque |
8 Nm |
| Angle of rotation | 90 ° | ||||
| 6AZ | ASA screw Oil deflector to crankcase lower half. Aluminium screws/bolts are permitted with and without colour coding (blue). |
N52K | M6 x 20 | Replace screw. Thread repairs exclusively with aluminium Helicoil threaded insert. Jointing torque and angle of rotation must be observed without fail. Jointing torque |
4 Nm |
| Angle of rotation | 90 ° | ||||
| 7AZ | ASA screw Transmission to oil sump. |
N52K | M8 x 50 | 19 Nm | |
| 8AZ | Hexagon nut Holder, transmission oil cooler line, to oil sump. |
N52K | M6 | 8 Nm | |
| 9AZ | Hexagon nut Holder, coolant hose, to oil sump. |
N52K | M6 | 9 Nm | |
| 10AZ | Hexagon screw Holder, coolant hose, to oil sump. |
N52K | M10 x 18 | 21 Nm | |
| 11AZ | Hexagon nut Oil level sensor to oil sump. |
N52K | M6 | 8 Nm | |
| 12AZ | Hexagon screw Coolant return line to oil sump. |
N52K | M10 x 18 | 41 Nm | |