11 51 Electric water pump with drive
WARNING: This page is about a different variant/trim than selected.
TIGHTENING TORQUE SPECIFICATION - ELECTRIC WATER PUMP WITH DRIVE
| Type | Thread | Tightening specification | Measure | ||
|---|---|---|---|---|---|
| 1AZ | ASA screws Electric water pump to crankcase. Aluminium screws/bolts are permitted with and without colour coding (blue). |
N52K/Nicht fur E70 N52K B30 | M8 x 32 | Replace screws. Thread repairs exclusively with aluminium Helicoil threaded insert. Jointing torque and angle of rotation must be observed without fail. Jointing torque |
10 Nm |
| Torque angle | 90 ° | ||||
| 2AZ | ASA screws Electric water pump to crankcase. Aluminium screws/bolts are permitted with and without colour coding (blue). |
E70 N52K B30 | M8 x 28 | Replace screws. Thread repairs exclusively with aluminium Helicoil threaded insert. Jointing torque and angle of rotation must be observed without fail. Jointing torque |
10 Nm |
| Torque angle | 90 ° | ||||