11 61 Air intake manifold
WARNING: This page is about a different variant/trim than selected.
TIGHTENING TORQUE SPECIFICATION - AIR INTAKE MANIFOLD
| Type | Thread | Tightening specification | Measure | ||
|---|---|---|---|---|---|
| 1AZ | Hexagon screw Air intake manifold to cylinder head. |
N52K | M7 x 50 | 15 Nm | |
| 2AZ | Hexagon nut Air intake manifold to cylinder head. |
N52K | AM7 (to DIN 439) | 15 Nm | |
| 3AZ | Hose clamp Clean-air gaiter to connection, throttle valve assembly. |
N52K | L80-100 | 3 Nm | |
| 4AZ | Ejot screw Fuel line to intake manifold |
N52K | 50 x 20 | 6 Nm | |
| 5AZ | Oval-head screw Holder, engine wiring harness, to intake manifold. |
N52K | M6 x 10 | 8 Nm | |