11 25 Pistons with Rings and Pins N52K B25
WARNING: This page is about a different variant/trim than selected.
PISTONS WITH RINGS AND PINS SPECIFICATION
| Piston and pin are paired to each other - replace together only. | ||
| Measuring point "A" (position) | mm | 10 |
| Piston diameter at measuring point "A" | ||
| Original (new dimension) | mm | 81.985±0.014 |
| Repair stage (new dimension) | mm | % |
| Oversize (new dimension) | mm | 82.235±0.014 |
| Piston installation clearance (piston new) | mm | 0.000...0.043 |
| Piston installation clearance (piston worn) | mm | 0.020...0.047 |
| Permissible total wear tolerance between piston and cylinder (engine operated) |
mm | 0.150 |