11 21 Crankshaft and Bearings N52K B30
WARNING: This page is about a different variant/trim than selected.
CRANKSHAFT AND BEARINGS SPECIFICATION
| Grinding stages, crankshaft guide bearing | ||
| Standard | mm | 24.0 F8 |
| Crankshaft axial play | mm | 0.060... 0.250 |
CRANKSHAFT AND BEARINGS SPECIFICATION
| Ground sizes of main bearing journals | Guide bearing journal | |
| Original (designation S1) | mm | 64.998... 64.993 |
| Original (designation S2) | mm | 64.992... 64.987 |
| Original (designation S3) | mm | 64.986... 64.981 |
| Crankshaft bearing clearance, radial | mm | 0.020... 0.046 |
| Max. permitted runout at centre crankshaft journal | mm | 0.150 |