11 24 Connecting Rods and Bearings N52K B25
WARNING: This page is about a different variant/trim than selected.
CONNECTING RODS AND BEARINGS SPECIFICATION
| Large connecting rod eye (without bearing) | mm | 53.600+0.016 |
| Conrod bushing: Inside diameter | mm | 20.000+0.013+0.004 |
| Connecting rod bearing, installation clearance | mm | 0.025... 0.061 |
| Permissible total deviation of connecting rods in one engine (without bearing shells) |
g | ± 5 |