SI number

WARNING: This page is about a different variant/trim than selected.

01 22 97 (239)

Consisting of:

1 = 0493157 Plate

NOTE: (Pressure plate) For removing and installing the spring cup

2 = 0493158 Spindle

NOTE: (Spindle with pressure plate) Spindle M14x1.5, nut M14, pressure plate and washer/For removing and installing the spring cup

3 = 0493159 Pin

NOTE: (Guide pin (2 pieces)) For fixing the gaskets and the intermediate plate on the intermediate case

4 = 0493160 Bush

NOTE: (Slip bush) For installing the piston in the cylinder of the intermediate plate

Fig 1: Identifying Device (242310)

Courtesy of BMW OF NORTH AMERICA, INC.