24 13 Transmission Extension, Bearings, Seals
WARNING: This page is about a different variant/trim than selected.
TIGHTENING TORQUE SPECIFICATION - TRANSMISSION EXTENSION, BEARINGS, SEALS
| Type | Thread | Tightening specification | Measure | ||
|---|---|---|---|---|---|
| 1AZ | Slotted nut/output flange | A5S 310Z/A5S 440Z/A5S 560Z/A5S 325Z | 120 Nm | ||
| 2AZ | Double hexagon nut/output flange | GA6HP26Z | until 09/02 without sealing ring in output flange | 80 Nm | |
| GA6HP19Z/GA6HP26Z | from 09/02 with sealing ring in output flange | 60 Nm | |||
| 3AZ | Output shaft nut to output flange | GA6L45R | 22x1.5 | 55 Nm | |