24 40 Torque converter
WARNING: This page is about a different variant/trim than selected.
TIGHTENING TORQUE SPECIFICATION - TORQUE CONVERTER
| Type | Thread | Tightening specification | Measure | ||
|---|---|---|---|---|---|
| 1AZ | Torque converter to flywheel | M8 | 26 Nm | ||
| A4S 270R/A4S 310R/A5S 310Z/A5S 300J/A5S 440Z/A5S 560Z/A5S 325Z/A4S 200R/GA6HP26Z/GA6HP19Z | M10 8.8 | 45 Nm | |||
| A5S360/390R | M10 | 45 Nm | |||
| A5S360/390R/GA6HP19Z/GA6HP26Z/GA6HP32Z/GA6L45R | M10 10.9 | 56 Nm | |||