17 22 Oil Cooler Pipes
WARNING: This page is about a different variant/trim than selected.
TIGHTENING TORQUE SPECIFICATION - OIL COOLER PIPES
| Type | Thread | Tightening specification | Measure | ||
|---|---|---|---|---|---|
| 5AZ | Cap nut on transmission oil cooler (on radiator) and on transmission | All | M18 x 1.5 | 20 Nm | |
| 5HP30 | M22 x 1.5 | 28 Nm | |||
| 6AZ | Oil lines on transmission | ||||
| Hollow bolt | All | M16 x 1.5 | 37 Nm | ||
| 7AZ | Oil lines on transmission oil cooler | A 5 S 300 J | 28 Nm | ||
| Hollow bolt | All | M14 x 1.5 | 27 Nm | ||
| 8AZ | Screw-in fitting on transmission | All | M14x1.5 und M16x1.5 | 37 Nm | |
| 9AZ | Oil hose on oil pipe | E23 | 28 Nm | ||
| 10AZ | Oil pipe bracket on radiator | E23 | 2 Nm | ||
| 11AZ | Oil pipe bracket on body | E23 | 6.5 Nm | ||
| 12AZ | Oil cooler on transmission | 5HP30 | 10 Nm | ||
| 13AZ | Transmission oil cooler line to transmission | N42 | M8 | 21 Nm | |
TIGHTENING TORQUE SPECIFICATION - OIL COOLER PIPES
| Type | Thread | Tightening specification | Measure | ||
|---|---|---|---|---|---|
| 1AZ | Transmission oil cooler line to transmission | N52K | M8x28 | 20 Nm | |
| 2AZ | Transmission oil cooler line to oil sump | N52K | M6 | 10 Nm | |
| 3AZ | Transmission oil cooler line to transmission sump | N52K | M6x35 | 8 Nm | |
| 4AZ | Transmission oil cooler line to transmission oil-water heat exchanger | N52K | M6x35 | 8 Nm | |
| 5AZ | Engine oil cooler lines to oil module/engine oil cooler | N52K | M8 | 20 Nm | |