17 21 Engine Oil Cooler

WARNING: This page is about a different variant/trim than selected.

TIGHTENING TORQUE SPECIFICATION - ENGINE OIL COOLER

		Type	Thread	Tightening specification	Measure
1AZ	Engine oil cooler to body	All			14 Nm
Oil cooler vapor extraction guide to trim panel		E36/M3	B4.8		4 Nm

TIGHTENING TORQUE SPECIFICATION - ENGINE OIL COOLER

		Type	Thread	Measure
1AZ	Transmission oil-water heat exchanger to front axle carrier	N52	M6x35	8 Nm
2AZ	Engine oil cooler to holder	N52	M8 x 35	12 Nm
3AZ	Engine oil cooler to holder	N52	Oval-head screw	3 Nm