12 62 Coolant Temperature
WARNING: This page is about a different variant/trim than selected.
TIGHTENING TORQUE SPECIFICATION - COOLANT TEMPERATURE
| Type | Thread | Tightening specification | Measure | ||
|---|---|---|---|---|---|
| 1AZ | Temperature sensor to water flange (glow time/coolant temperature gauge) | M21 | 18 Nm | ||
| M51 | 13 Nm | ||||
| 2AZ | Temperature switch (5.5 °C/17 °C) to fuel filter/cylinder head | M21 | 18 Nm | ||
| 3AZ | Coolant temperature sensor (2- pin plug-in connection) | S38/S50 | 13 Nm | ||
| S85 | M12/1.52 | 13.5 Nm | |||
| All/others | 20 Nm | ||||
| 4AZ | Remote thermometer sensor (2-pin plug-in connection) | All | 20 Nm | ||
| Remote thermometer sensor (4-pin plug-in connection) | M62 | 16 Nm | |||
| S62 | M12 x 1.5 | 14 Nm | |||
| 5AZ | Remote thermometer sensor on coolant flange | S50 | 18 Nm | ||
| 6AZ | Temperature sensor - air | S38/S50 | 13 Nm | ||
| 7AZ | Temperature sensor - oil | S38/S50 | 13 Nm | ||