SI number

WARNING: This page is about a different variant/trim than selected.

00 02 99 (399)

Consisting of:

1 = 0494122 Cable cabinet

NOTE: Without content and without accessories Base for cable cabinet I and II

Fig 1: Identifing Cable Cabinet (000190)

Courtesy of BMW OF NORTH AMERICA, INC.

6 = 0494123 Frame

NOTE: (Frame) Swivel panel frame support of the cable suspensions in the cable cabinet I and II

9 = 0494124 Floor

NOTE: (Floor) For cable cabinet I only

2 = 0490072 Foil

NOTE: (Foil set I) For identification of the storage locations in the cable cabinet I - valid status in each case

3 = 0490073 Holder

NOTE: (Cable holder set - H -) For cable cabinet I only 24 guide rails with 15 holding straps each for accommodating the adapter cables

= 0490074

4 = 0490074 Cable holder

NOTE: (Cable holder) Cable holder - B - For mounting the engine test cable For extending the cable suspensions in cable cabinet I and II

7 = 0493529 Drawer block

NOTE: For cable cabinet I only

8 = 0493530 Magnet

NOTE: (Magnet) Magnet with roller. For better fixation and spacing of the swivel panels - Only for retrofittings in cable cabinets I and II

10 = 0493532 Register

NOTE: For locating the BMW special tools for the vehicle electrical system in cable cabinet I and II