51 24 Rear lid locks
TIGHTENING TORQUE SPECIFICATION - REAR LID LOCKS
| Type | Thread | Tightening specification | Measure | ||
|---|---|---|---|---|---|
| 1AZ | Banjo bolt to hydraulic unit and to hydraulic cylinder | E39/Touring | 10+2.5 Nm | ||
| E65/E66/E67 | 15 Nm | ||||
| 2AZ | Oil filler plug to hydraulic unit | E65/E66/E67/E39/Touring | 8+2 Nm | ||
| E61 | 1+0.3 Nm | ||||
| 3AZ | Engine bolt to hydraulic unit | E65/E66/E67 | 5+1.5 Nm | ||
| 4AZ | Hydraulic unit to bracket | E61 | 2+1.5 Nm | ||
| E65/E66/E67 | 10 Nm | ||||
| 5AZ | Rear lid lock to rear lid | E60/E63/E64/E65/E66/E67/E85/E86 | 10 Nm | ||
| 6AZ | Striker to body | E60/E63/E64/E65/E66/E67/E85/E86 | 10 Nm | ||
| 7AZ | Bracket, hydraulic unit, to body | E65/E66/E67 | 10 Nm | ||
| 8AZ | Bracket, angle sensor, to body | E65/E66/E67 | 7 Nm | ||
| 9AZ | Valve to hydraulic unit | E65/E66/E67 | 14 Nm | ||
| 10AZ | Ball pin for hydraulic cylinder to body | E61 | Install with Loctite 270 | 41 Nm | |
| 11AZ | Emblem actuator to holder, emblem actuator | E89 | 4 Nm | ||
| 12AZ | Rear lid lock to rear inner plate | E89 | 10 Nm | ||
| 13AZ | Rear lid lock to rear inner plate | E89 | 1.5 Nm | ||
| 14AZ | Striker to body | E89 | 10 Nm | ||