51 12 Rear Bumper
TIGHTENING TORQUE SPECIFICATION - REAR BUMPER
| Type | Thread | Tightening specification | Measure | ||
|---|---|---|---|---|---|
| 1AZ | Bumper to carrier | E31 | M10 | 40 Nm | |
| E32/E34/E36 | M8 | 22 Nm | |||
| E34 | M10 | 42 Nm | |||
| 2AZ | Bumper/carrier to impact absorber | E36 | M10 | Install bolts with bolt cement. | 42 Nm |
| E38 | M12 | 45 Nm | |||
| E39 | M10 | 45 Nm | |||
| E46 | M10 | 41 Nm | |||
| E31/E32/E34/E30/Mod. 88 | M12 | 48 Nm | |||
| E52 | M10 | 38 Nm | |||
| E53 | M12 | 55 Nm | |||
| E85/E86 | 19 Nm | ||||
| E60/E61/E63/E64 | M10 | 36 Nm | |||
| 3AZ | Impact absorber/carrier to body | E30/E24 | 23 Nm | ||
| E31/E32/E34 | M6 | 9 Nm | |||
| E36/E46 | M8 | 22 Nm | |||
| E39 | M8 | 20 Nm | |||
| E53 | M8 | 24 Nm | |||
| E65/E66/E67 | 38 Nm | ||||
| E52/E85/E86/E89/ | 19 Nm | ||||
| E60/E61/E63/E64 | M10 | 36 Nm | |||
| E83 | M12 | 71 Nm | |||
| 4AZ | Bumper to side panel | E30 | 7 Nm | ||
| 5AZ | Bracket to side panel | E36/E46 | 3 Nm | ||
| E39 | 6 Nm | ||||
| 6AZ | Holder, bottom, to body | E36 | 8.5 Nm | ||
| 7AZ | Screw for lower panel | E36 | 2.5 Nm | ||
| 8AZ | Bumper to tail panel | E60 | M6 | Replace screw with sealing washer | 2.5 Nm |
| 9AZ | Guide to side panel | E83 | 2 Nm | ||
| E61 | 3 Nm | ||||
| 10AZ | Guide to rear trim panel | E83 | 2.8 Nm | ||
| E61 | 4.5 Nm | ||||