51 23 Hood/bonnet locks
TIGHTENING TORQUE SPECIFICATION - HOOD/BONNET LOCKS
| Type | Thread | Tightening specification | Measure | ||
|---|---|---|---|---|---|
| 1AZ | Retaining hook to engine hood/bonnet (replace microencapsulated screws) | E46/E52/E53/E60/E61/E63/E64/E65/E66/E83/E85/E86/E89 | 10 Nm | ||
| E38/E39 | 12 Nm | ||||
| E36 | Hexagon screw | 10 Nm | |||
| Torx bolt | 12 Nm | ||||
| 2AZ | Lock to body (replace microencapsulated screws) | E36/E38/E39/E46/E52/E53/E60/E61/E63/E64/E83 | 10 Nm | ||
| E65/E66/E85/E86 | 8 Nm | ||||
| E89 | 12 Nm | ||||
| 3AZ | Lock to engine hood/bonnet (replace microencapsulated screws) | E36/E46/E52 | 10 Nm | ||
| E39 | 12 Nm | ||||