22 11 100 Replacing Right Engine Support Arm (N63)
Necessary preliminary tasks:
- Secure engine in installation position. See 11 00 670 SECURING ENGINE IN INSTALLATION POSITION (N63) .
- Remove underbody protection . See 51 47 490 REMOVING AND INSTALLING/REPLACING FRONT UNDERBODY PROTECTION .
- Remove reinforcement plate . See 31 10 010 REMOVING AND INSTALLING/REPLACING REINFORCEMENT PLATE .
- Release tie rod . See 32 21 231 REPLACING (REMOVING AND INSTALLING) LEFT OR RIGHT TIE ROD .
Release screws and engine support arm.
Tightening torque. See 22 11 3AZ in ENGINE AND GEARBOX SUSPENSION - TIGHTENING TORQUES (N54, N63) .