33 55 000 Removing and installing/replacing rear anti-roll bar

Necessary preliminary tasks:

• Remove both ANTI-ROLL BAR LINKS FROM ANTI-ROLL BAR 

Release screws (1).

Replacement only: Remove BOTH RUBBER MOUNTS FROM STABILIZER .

Turn anti-roll bar (2) and remove sideways.

Installation: 

Check BOTH RUBBER MOUNTS FOR DAMAGE , replace if necessary.

Align stabilizer centrally.

Tightening torque 33 55 1AZ .

Fig 1: Identifying Anti-Roll Bar And Screws

Courtesy of BMW OF NORTH AMERICA, INC.