41 00... Installing A Cavity Acoustic Baffle (Expanded)

WARNING: This page is about a different variant/trim than selected.

NOTE: Carry over schematic representation to the relevant vehicle type.
The following repair represents the procedure for an already expanded cavity acoustic baffle.
The cavity acoustic baffle remains on the body in this instance.
Before these work steps, prepare the new part so that it is ready to install (adapting, cutting to size, applying welding primer etc.).

Clean contact surface (1) with spirit.

Apply a bead approx. 15 mm high (2) of window glass adhesive to contact surface (1), see 41 00... Overview of consumables (Electronic Parts Catalogue - EPC) .

Fit, secure and weld up new part.

Fig 1: Identifying Contact Surface And Window Glass Adhesive

Courtesy of BMW OF NORTH AMERICA, INC.

WARNING: Ensure adequate ventilation over entire processing period.