1.0 Airbags And Restraint Systems

WARNING: This page is about a different variant/trim than selected.

On vehicles with airbags and restraint systems, observe the relevant safety instructions , see 72 SAFETY PRECAUTIONS AND GENERAL INFORMATION .
During straightening work on the body, you will be exposed to the risk of accidental airbag triggering when the battery is connected.

Due to this potential hazard, it is essential to disconnect the battery negative lead prior to welding and straightening work. Prior to disconnecting the negative lead, interrogate the fault memories of the control units if necessary, see 12 00... INSTRUCTIONS FOR DISCONNECTING AND CONNECTING BATTERY .