4.0 Hardening Times
WARNING: This page is about a different variant/trim than selected.
- Do not move the vehicle before the adhesive has hardened.
- Check the degree of hardness of the adhesive with a fingernail.
- If the adhesive cannot be pressed in any further with a fingernail, the vehicle may be moved (without engine force) for further processing applications (e.g. painting).
Vehicle strength for driving applications is achieved after:
- 48 hours at an object temperature of 15°C.
- 10 hours at an object temperature of 23°C.
- 1 hour at an object temperature of 60°C.
- 0.5 hours at an object temperature of 85°C.
IMPORTANT:
When using radiant heaters, make sure that the object temperature does not exceed 85 °C. Excessively high temperatures will destroy the adhesive.