3.0 Adhesive Application: Notes
WARNING: This page is about a different variant/trim than selected.
- Processing temperature of glue cartridge 18°C - 30°C.
- Object temperature, vehicle and new parts, min. 15°C.
- Read the vehicle-specific repair instructions to determine the thickness and positioning of the adhesive bead.
- After applying the adhesive, check whether an adhesive component has emerged at the back of the glue cartridge. If yes, break off the bonding procedure. Clean new part. Use new glue cartridge. Contact national hotline.
- Join components and secure in position.
- Remove excess adhesive. Do not use solvent cleaning agents.