51 49 002 Removing and installing/replacing (upper) panel for rear window frame

WARNING: This page is about a different car, the 2010 BMW X6. However, it is still accessible from the selected car via links, so may be relevant.

Release panel (1) at clips (2) and retainers (3).

Fig 1: Identifying Rear Window Frame Panel, Clips And Retainers

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

If necessary, replace faulty clips (1).

Lugs (2) on panel (3) must not be damaged.

Fig 2: Identifying Rear Window Frame Panel, Lugs And Clips

Courtesy of BMW OF NORTH AMERICA, INC.