11 33 052 Removing and installing/replacing all rocker arms on left side (N63 hybrid)

Special tools required:

(cylinder bank 5 to 8)

WARNING: High-voltage system - danger to life!

Necessary preliminary tasks:

IMPORTANT: Used rocker arms (1) may only be reused in the same position.
Tolerance classes are not required.

Remove rocker arm (1) and set down in a tidy and orderly fashion in special tool 11 4 480 .

Install rocker arm (1).

Align all rocker arms (1) straight.

Fig 1: Identifying Rocker Arm

Courtesy of BMW OF NORTH AMERICA, INC.

Assemble engine.