11 61 068 Removing and installing/replacing intake plenum (N63 hybrid)

Special tools required:

WARNING: High-voltage system - danger to life!

WARNING: The following points must be strictly observed prior to starting work :

Necessary preliminary tasks:

Detach engine ventilation hose (1).

Unscrew nuts (2).

Tightening torque: 11 61 1 AZ.

Fig 1: Identifying Engine Ventilation Hose And Nuts

Courtesy of BMW OF NORTH AMERICA, INC.

Fig 2: Fitting Special Tools For Engine Support

Courtesy of BMW OF NORTH AMERICA, INC.

Release nuts on left and right engine support arms.

Raise engine.

Fig 3: Identifying Left And Right Engine Support Nut

Courtesy of BMW OF NORTH AMERICA, INC.

Release screw (1).

Tightening torque: 11 61 2 AZ.

Installation:

Replace all profile seals.

Fig 4: Identifying Throttle Valve And Screw

Courtesy of BMW OF NORTH AMERICA, INC.

Assemble engine and vehicle.

Check intake system for leaks.