34 33 200 Removing and installing electric vacuum pump
WARNING:
High-voltage system - danger to life!
WARNING:
Compliance with the following points is mandatory before beginning work:
- Observe SAFETY INSTRUCTIONS for handling with hybrid vehicles
Necessary preliminary tasks:
- LOWER FRONT AXLE
- Read and comply with GENERAL INFORMATION .
Disconnect plug connection (1).
Unlock quick-connect coupling (2) and detach vacuum line.
Release nut (3) and detach lines (4) from bracket and place to one side.
Release screws (1) and remove electrical vacuum pump (2).
Installation:
Replace screws.
Tightening torque 34 33 3AZ .