Hybrid-specific Check Control Messages

If faults occur in the E72, the driver is informed of these by means of the Check Control messages. The following table summarizes the hybrid-specific Check Control messages.

Display	Meaning	Cause
	Refuelling is possible in... s	Hybrid pressurized fuel tank Refuelling request detected
	Hybrid battery is charging, charging procedure finished, etc.	These Check Control messages can have various causes, such as charging source connected, driver must switch on ignition, charging procedure in progress, etc.
	Engine malfunctioning Power loss or engine does not shut off or hybrid system malfunctioning. Engine malfunctioning	E-machine fault, BPCM fault, TCM fault, E-machine has failed, ELUP fault, vehicle can only be driven conventionally using combustion engine
	Engine Cannot continue driving	Hybrid system shut down
	Hybrid system malfunctioning	Insulation fault, HV interlock fault or HV battery fault
	Hybrid system shut down.	HV system shut down

Although there are two different power sources and two different energy accumulators, there are no differences in operating an ActiveHybrid X6 compared to a conventional vehicle. Depending on various parameters, the hybrid system automatically configures the best settings for driving dynamically and effectively.