51 71 Seals and Loose Body Parts
TIGHTENING TORQUE SPECIFICATIONS - SEALS AND LOOSE BODY PARTS
| Type | Thread | Tightening specification | Measure | |
|---|---|---|---|---|
| 1AZ Rear spoiler | E70 | Screw | 2 Nm | |
| Nut | 7 Nm | |||
| 2AZ Tension strut in engine compartment | E70, E71, E72 | Replace screws | ||
| Jointing torque | 19 Nm | |||
| Torque angle | 90 ° | |||
| 3AZ Diagonal strut to bumper carrier | E70, E71, E72 | 18 Nm | ||
| 4AZ Cross-strut to body | E70, E71, E72 | Replace screws | ||
| Jointing torque | 10 Nm | |||
| Torque angle | 90 ° | |||
| 5AZ Lashing rail to body | E70, E71, E72 | 20 Nm | ||
| 6AZ Support piece, sill to body | E70, E71, E72 | M8 | 10 Nm | |
| 7AZ APM bracket to cross-strut | E72 | 11 Nm | ||
| 8AZ Intake pipe bracket to cross-strut | E72 | 11 Nm |