11 13 Oil Pan
WARNING: This page is about a different variant/trim than selected.
OIL PAN-TIGHTENING TORQUE SPECIFICATIONS
| Type | Thread | Description | Tightening Specification | ||
|---|---|---|---|---|---|
| 1AZ | Oil drain plug | N63 | M18 x 1.5 | Replace sealing ring | 40 Nm |
| 2AZ | Oil sump top section to crankcase | N63 | M8 | 25 | |
| 3AZ | Oil sump bottom section to oil sump top section | N63 | M8 | Replace micro-encapsulated screws | 27 Nm |
| 4AZ | Oil deflector to oil sump top section | N63 | M6 | 10 Nm | |
| 5AZ | Screw plug, oil channel, to oil sump top section | N63 | M24x1.5 | Replace sealing ring | 50 Nm |
| 6AZ | Oil condition sensor to oil sump bottom section | N63 | M6 | Replace O-ring | 8.5 Nm |