22 32 001 Replacing Rubber Mount For Transmission Mounting (ATC 700): Installation

WARNING: This page is about a different variant/trim than selected.

Arrow on rubber mount must point to arrow on housing.

Coat housing bore and rubber mount with Circolight (refer to BMW Parts Service).

Fig 1: Identifying Rubber Mount And Circolight

Courtesy of BMW OF NORTH AMERICA, INC.

Insert special tool 22 1 102 with pins into openings of rubber mount.

Fig 2: Identifying Rubber Mount And Pins

Courtesy of BMW OF NORTH AMERICA, INC.

Install rubber mount with special tools 22 1 102 / 22 1 103 / 33 4 465 and 22 1 017.

Fig 3: Identifying Rubber Mount With Special Tools

Courtesy of BMW OF NORTH AMERICA, INC.