51 71 Gaskets and loose body components
TIGHTENING TORQUE SPECIFICATIONS - GASKETS AND LOOSE BODY COMPONENTS
| Type | Thread | Tightening specifications | Dimension | ||
|---|---|---|---|---|---|
| 1AZ | Rear spoiler | E70 | Screw | 2 Nm | |
| Nut | 7 Nm | ||||
| 2AZ | Trailing link in engine compartment | E70, E71, E72 | Replace screws | ||
| Jointing torque | 19 Nm | ||||
| Angle of rotation | 90 ° | ||||
| 3AZ | Diagonal strut to bumper carrier | E70, E71, E72 | 18 Nm | ||
| 4AZ | Cross-strut to body | E70, E71, E72 | Replace screws | ||
| Jointing torque | 10 Nm | ||||
| Angle of rotation | 90 ° | ||||
| 5AZ | Lashing rail to body | E70, E71, E72 | 20 Nm | ||
| 6AZ | Support piece, sill to body | E70, E71, E72 | M8 | 10 Nm | |
| 7AZ | APM bracket to cross-strut | E72 | 11 Nm | ||
| 8AZ | Intake pipe bracket to cross-strut | E72 | 11 Nm | ||