11 15 016 Removing and installing/replacing engine ventilation connecting line
WARNING: This page does not describe the selected car, but rather 33 other vehicles, including the 2018 BMW M6, 2018 BMW 650i xDrive, 2018 BMW 650i, 2018 BMW 640i xDrive, and 2018 BMW 640i. However, it is still accessible from the selected car via links, so may be relevant.
Necessary preliminary work:
- Remove RIGHT INTAKE SILENCER HOUSING .
IMPORTANT:
Increased risk of line (2) breakage
Use a screwdriver (1) to unlock all the latch mechanisms one after the other.
Pull off the connection line (2) at the same time.
IMPORTANT:
Increased risk of line (2) breakage
Use a screwdriver (1) to unlock all the latch mechanisms one after the other.
Pull off the connection line (2) at the same time.
Feed out the connection line (2) and remove.
Installation note:
No catches (1) are permitted to be damaged or missing.
If there is a faulty latch mechanism (1), the line must be replaced.