LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2011 >> M3 2D Convertible, Automatic DCT >> Repair and Diagnosis >> External Pages >> Different car >> Section 1907 (General Electrical System - Special Tools) >> General Electrical System >> 61-4320 Crimping tool

61-4320 Crimping tool

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2016 BMW 760Li, 2015 BMW 760Li, 2014 BMW 760Li, 2013 BMW 760Li, and 2012 BMW 760Li. However, it is still accessible from the selected car via links, so may be relevant.

0494158 614320 Crimping tool Minimum set: Measuring and testing equipment MP

NOTE: (Crimping set with pliers) For optical fibres and cable repairs. As from 06/2006 extended by universal crimping head 61 4 328. As from 03/2010 61 4 328 will be removed from the set and can be ordered separately under 61 4 340. As from 03/2010 61 4 322 will be replaced by 61 4 329. As from 03/2010 61 4 326 will only be available as a replacement. [Released]
Fig 1: Identifying Crimping Tool (0494158)
G04727498Courtesy of BMW OF NORTH AMERICA, INC.

Storage Location

M22 x 201

SI number

01 14 01 (766)

Consisting of:

  1. 2 = 0496847 Crimping tool
    NOTE: Replaces special tool 61 4 322 as of 03/2010. Can be ordered separately again as of 04/2012. [Released]
  2. 8 = 0495555 Crimping tool
    NOTE: (Universal crimping head) For crimping contacts (without seal) and cable cross-sections from 0.35 - 2.5 mm. As from 03/2010 61 4 328 will not longer be supplied in set 61 4 320. Order by way of separate special tool number 61 4 340 [Replaced]
  3. 7 = 0494320 Supplement
    NOTE: (Replacement knife) With tool for changing blades in stripping unit. Must be ordered separately, not included in 61 4 320 delivery specification! Discontinued as from 03/2010 [Discontinued]
  4. 5 = 0494178 Crimping tool
    NOTE: (Crimping head) For crimping MPQ contacts [Released]
  5. 6 = 0494164 Supplement
    NOTE: (Replacement blade) For face-cutting optical fibres. From 03/2006, no longer included in set 61 4 320 but individually available as a replacement set. Replacement blade only suitable for 61 4 322. [Released]
  6. 4 = 0494162 Crimping tool
    NOTE: (Crimping head) For crimping MQS contacts [Released]
  7. 3 = 0494161 Crimping tool
    NOTE: (Crimping head) For crimping optical fibre contacts [Released]
  8. 2 = 0494160 Crimping tool
    NOTE: (Crimping head) For stripping insulation and cutting optical fibre to length Replaced as from 03/2010 by 61 4 329 (0 496 847) [Replaced]
  9. 1 = 0494159 Handle
    NOTE: Basic handle for crimping heads [Released]