LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2011 >> Alpina B7 >> Repair and Diagnosis >> Engine Mechanical >> Blowers, Superchargers & Turbochargers >> Engine - Repair - F01/F02 >> 1114 Housing Cover >> 1114250 Removing and installing/sealing rear coolant end cover (N63) >> Necessary preliminary work

Necessary preliminary work

Release all screws in area (1).

Tightening torque 11 14 5AZ .

Remove end cover.

NOTE: Clean sealing surfaces with special tool 11 4 470 .
Fig 1: Identifying End Cover Screws Area
G06888484Courtesy of BMW OF NORTH AMERICA, INC.

Installation note: 

scientia non olet · About LEMON Manuals