12 14 521 Replacing crankshaft pulse generator (N54)

IMPORTANT: Read and comply with notes on PROTECTION AGAINST ELECTROSTATIC DAMAGE (ESD PROTECTION) .

Necessary preliminary tasks:

NOTE: The installation location of the crankshaft pulse generator is underneath the starter.

Preparatory tasks:

Detach plug (1) from crankshaft pulse generator (2).

Release screw.

Tightening torque 13 62 4AZ .

Withdraw pulse generator (2) from crankcase.

Installation:

Replace sealing ring.

Fig 1: Detaching Plug From Crankshaft Pulse Generator

Courtesy of BMW OF NORTH AMERICA, INC.

NOTE: Assemble engine.

Check stored fault message.

Now clear the fault memory.