LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2011 >> 535i Standard >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine - Oil Pan, Crankshaft Seal, Timing Case Cover, Crankcase Ventilation System - Repair >> Crankshaft Seal, Timing Case Cover >> N52 Engine >> 11 14 010 Replacing sealing cap for vacuum pump (N52)

11 14 010 Replacing sealing cap for vacuum pump (N52)

Special tools required: 

Necessary preliminary work: 

NOTE: For purposes of clarity, graphics show alternator and power steering pump removed.

Secure special tools 11 8 535 , 11 8 531 , 11 8 537 and special tool 11 9 266 .

Fig 1: Securing Special Tools
G09919833Courtesy of BMW OF NORTH AMERICA, INC.

Position special tool 11 8 537 by hand on sealing cap.

Screw in special tool 11 8 534 .

NOTE: The sealing cap is pressed out diagonally during this operation
Fig 2: Screwing-In Special Tool 11 8 534
G09919834Courtesy of BMW OF NORTH AMERICA, INC.

Screw in new sealing cap (1) with special tools 11 8 532 and 11 8 533 until flush with crankcase upper part.

Fig 3: Screwing-In Sealing Cap Using Special Tools
G09919835Courtesy of BMW OF NORTH AMERICA, INC.

Assemble engine.

scientia non olet · About LEMON Manuals