12 90 Electronics box, wiring harness (N53, N55, N55 Hybrid, N63, N57 D30 U/O/T/S 0/1)
TIGHTENING TORQUE SPECIFICATIONS - ELECTRONICS BOX, WIRING HARNESS
| Type | Thread | Tightening specifications | Dimension | ||
|---|---|---|---|---|---|
| 1AZ | Electronics box, lower section on body | N57 D30 U 0/N57 D30 O 0/N57 D30 T 0/N57 D30 O 1/N57 D30 T 1/N57 D30 S 1/N53/N63 | 8 Nm | ||
| 2AZ | Electronics box, cover on lower section | N57 D30 U 0/N57 D30 O 0/N57 D30 T 0/N57 D30 O 1/N57 D30 T 1/N57 D30 S 1/N53/N63 | 2.5 Nm | ||
| 3AZ | Auxiliary box on heating and air-conditioning unit | N57 D30 U 0/N57 D30 O 0/N57 D30 T 0/N57 D30 O 1/N57 D30 T 1/N57 D30 S 1/N53/N63/S63 B44 T 0 | 2.5 Nm | ||
| 4AZ | Supplementary box cover to lower section | N57 D30 U 0/N57 D30 O 0/N57 D30 T 0/N57 D30 O 1/N57 D30 T 1/N57 D30 S 1/N53/N63/S63 B44 T 0 | 2.5 Nm | ||
| 5AZ | Earth cable for ignition coils | N53/N55/N55 Hybrid | 5 Nm | ||
| 6AZ | Carrier plate on heating and air-conditioning unit | N53/N55/N55 Hybrid | 2.5 Nm | ||
| 7AZ | Positive battery cable to carrier plate | N53/N55/N55 Hybrid | M6 | 8 Nm | |
| 8AZ | Cable channel to engine block | N53/N55/N55 Hybrid | M6 | Replace aluminum screws. | 8 Nm |
| 9AZ | Earth cable to crankcase lower section | N53/N55/N55 Hybrid | M8 | Replace aluminum screw. | |
| Jointing torque | 8 Nm | ||||
| Angle of rotation | 45 ° | ||||
| 10AZ | Earth cable to rear cylinder head | N53/N55/N55 Hybrid | M6 | 8 Nm | |