SI number

01 14 01 (766)

Consisting of:

1. 2 = 0496847 Crimping tool
   NOTE: Replaces special tool 61 4 322 as of 03/2010. Can be ordered separately again as of 04/2012.
2. 8 = 0495555 Crimping tool
   NOTE: (Universal crimping head) For crimping contacts (without seal) and cable cross-sections from 0.35 - 2.5 mm, see SI 2 04 06 293. As from 03/2010 61 4 328 will not longer be supplied in set 61 4 320. Order by way of separate special tool number 61 4 340, see SI 02 01 10 615
3. 7 = 0494320 Supplement
   NOTE: (Replacement knife) With tool for changing blades in stripping unit. Must be ordered separately, not included in 61 4 320 delivery specification! Discontinued as from 03/2010, see SI 02 01 10 (615).
4. 5 = 0494178 Crimping tool
   NOTE: (crimping head) For crimping MPQ contacts
5. 6 = 0494164 Supplement
   NOTE: (Replacement blade) For face-cutting optical fibres. From 03/2006, no longer included in set 61 4 320 but individually available as a replacement set, see SI 02 01 10 (615). Replacement blade only suitable for 61 4 322.
6. 4 = 0494162 Crimping tool
   NOTE: (Crimping head) For crimping MQS contacts
7. 3 = 0494161 Crimping tool
   NOTE: (Crimping head) For crimping optical fibre contacts
8. 2 = 0494160 Crimping tool
   NOTE: (Crimping head) For stripping insulation and cutting optical fibre to length Replaced as from 03/2010 by 61 4 329 (0 496 847), see Service Information 02 01 10 (615).
9. 1 = 0494159 Handle
   NOTE: Basic handle for crimping heads