35 40 001 Removing and installing or replacing accelerator pedal module

WARNING: This page is about a different variant/trim than selected.

Take off cap.

Release screw.

Pull accelerator pedal module upwards out of fixture.

Installation:

Tightening torque 35 40 1AZ .

Fig 1: Pulling Accelerator Pedal Module Upwards Out Of Fixture

Courtesy of BMW OF NORTH AMERICA, INC.

Pull off plug (1).

Remove accelerator pedal module.

Fig 2: Identifying Plug

Courtesy of BMW OF NORTH AMERICA, INC.

IMPORTANT: Accelerator pedal module can only be replaced completely with adapter plate.