63 31 000 Removing and installing/replacing complete interior roof light (front)

WARNING: This page is about a different variant/trim than selected.

Special tools required:

IMPORTANT: Follow instructions for HANDLING LIGHT BULBS (INTERIOR LIGHTS) .

Version with roof switch cluster:

Operation is described in:

Version without roof switch cluster:

IMPORTANT: Interior roof light (1) and roofliner (2) must not be damaged.

Lift interior roof light (1) from roofliner (2) with special tool 00 9 340 /00 9 341.

Disconnect associated plug connection and remove interior roof light (1).

Replacement:

Fig 1: Lifting Interior Roof Light From Roofliner

Courtesy of BMW OF NORTH AMERICA, INC.

Convert BULBS if necessary.