63 25 000 Removing and installing/replacing auxiliary brake light
WARNING: This page is about a different variant/trim than selected.
Unclip auxiliary brake light cover (1) at retaining points (3).
Remove auxiliary brake light cover (1) in direction of arrow from roofliner (2).
Installation:
Retaining hooks (3) and guides (2) of auxiliary brake light cover (1) must not be damaged.
Make sure cover for auxiliary brake light (1) is correctly seated.
Unfasten plug connection (1) and disconnect.
Unlock slide (2) in direction of arrow and remove auxiliary brake light (4) from rear window (3).
Installation:
Make sure auxiliary brake light (4) is correctly positioned on rear window (3).