LEMON Manuals
: Even more car manuals for everyone
Home
>>
BMW
>>
2011
>>
335i 2D Convertible, Standard
>>
Repair and Diagnosis
>>
External Pages
>>
Different variant/trim
>>
Section 39 (Collision - Body Panel Repair (E90))
>>
Body Panel Repair General Information
>>
41 00... Welding And Soldering Steel Components
>>
B. Soldering Steel Components
>>
4. Brazing Solder/Tinning
4. Brazing Solder/Tinning
WARNING:
This page is about a different variant/trim than selected.
Execute brazed seam without overheating the solder and with low heat dissipation. If necessary, use heat protecting paste.