3.3 ARC Welding And Brazing Solder

WARNING: This page is about a different variant/trim than selected.

IMPORTANT: The extremely bright arc during welding may cause serious injury to the eyes if appropriate protective measures are not taken.

Use a welding screen suitable for the relevant welding method (metal active gas or metal inert gas).
Separation of workbays with protective curtains.
Use a welding-emissions extractor facility.
The welder must wear protective clothing and gloves which are suitable for welding (i.e. flameproof).
A fire extinguisher must be located within reach of the welding area.
Do not carry out any welding work in the proximity of a fuel tank e.g. when it is installed.
Note national regulations.