LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2011 >> 335i 2D Convertible, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 39 (Collision - Body Panel Repair (E90)) >> Body Panel Repair General Information >> 41 00... Notes On Adhesive K2 >> Preparation Of The Glue Cartridge (195 ml)

Preparation Of The Glue Cartridge (195 ml)

WARNING: This page is about a different variant/trim than selected.

Opened glue cartridges may be used again before the expiry date as long as a new mixing tube is used.

The working temperature of glue cartridge must be at least 20°C.

Application time of the adhesive approx. 20 min

IMPORTANT: At working temperatures above 30°C, the application time of the adhesive is reduced to 10 min!

Insert glue cartridge into cartridge gun, remove cap and allow both adhesive components to emerge. Strip adhesive components uniformly and attach mixing tube. Only use mixing tubes supplied with glue cartridge. Allow approx. 10 cm of mixed adhesive to emerge.

Only after this apply the mixed adhesive to one side of the bonding surface.

scientia non olet · About LEMON Manuals