1.0 Recommended Tools And Equipment
WARNING: This page is about a different variant/trim than selected.
Grinding work on the outer skin:
- To carry out grinding work by hand or machine, you must use the recommended tools and equipment
The workbay can be cleaned with conventional extractor systems (low dust concentration).
Grinding work on the structure (except Z8):
- To carry out grinding work by hand or machine, you must use the recommended tools and equipment
The workbay can be cleaned with conventional extractor systems (low dust concentration).
Z 8 Spaceframe structure:
- To carry out machine grinding on the structure, you must use the recommended device with grinding dust extractor facility
The workbay must be cleaned with the recommended explosion-proof extractor system
High dust concentration, explosion hazard!