54 12 117 Replacing seal for glass slide/tilt sunroof lid

WARNING: This page is about a different variant/trim than selected.

Necessary preliminary tasks

Detach seal (1) from glass slide/tilt sunroof lid (2).

Fig 1: Detaching Seal From Glass Slide/Tilt Sunroof Lid

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Coat guide channel (1) and seal (2) with soapy water.

Begin installation at rear middle, with sealing joint (3).

Do not pull seal too tightly in radii (leakage).

Fig 2: Locating Coat Guide Channel, Seal And Sealing Joint

Courtesy of BMW OF NORTH AMERICA, INC.