34 41... Removing and installing or replacing gaiter for handbrake lever

WARNING: This page is about a different variant/trim than selected.

Special tools required:

Unclip gaiter with special tool 00 9 317 .

Fig 1: Removing Handbrake Lever Gaiter Using Special Tool

Courtesy of BMW OF NORTH AMERICA, INC.

Pull gaiter (1) over handbrake lever.

Cut cable ties (2) and remove gaiter.

Installation:

Eye of cable tie must face downward

Fig 2: Identifying Handbrake Lever Gaiter And Cable Ties

Courtesy of BMW OF NORTH AMERICA, INC.