Vehicles as of model year approx. 07/05
WARNING: This page is about a different variant/trim than selected.
Pull brake hose out of both holders (1).
IMPORTANT:
Grip brake hose at square head (2) so that connecting piece can not rotate in retaining bracket.
Detach brake hose from brake line (3).
Installation:
Tightening torque 34 32 1AZ .
Detach brake hose from brake caliper (4).
Installation:
Tightening torque 34 32 2AZ .
IMPORTANT:
First tighten brake hose on brake caliper.
Move wheels into straight-ahead position.
Insert brake hose in bracket and screw onto brake pipe.
Never twist brake hose when installing it and avoid all contact with parts attached rigidly to the body.
Move wheels into straight-ahead position.
Insert brake hose in bracket and screw onto brake pipe.
Never twist brake hose when installing it and avoid all contact with parts attached rigidly to the body.