61 31 204 Replacing switch combination for seat adjustment
WARNING: This page is about a different variant/trim than selected.
Necessary preliminary tasks:
- Remove outer cover on front seat. See OUTER COVER (NORMAL/MANUAL SEAT) or OUTER COVER (NORMAL/ELECTRIC SEAT) .
Unlock retaining tabs (3) in direction of arrow and remove switch combination (1) from cover.
Disconnect plug connection (2).
Installation:
Retaining tabs (3) of cover and guide (4) of switch combination (1) must not be damaged.
Make sure switch combination (1) is correctly seated in retaining tabs (3).