61 31 133 Removing and installing/replacing AV connection socket

WARNING: This page is about a different variant/trim than selected.

IMPORTANT: Grip behind trim (1) from below and release catch (2) (risk of damage).

NOTE: Version with rear air conditioning is shown.

Fig 1: Gripping Behind Trim From Below And Release Catch

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Catches (1 and 3) and guides (2) must not be damaged.

Fig 2: Identifying Catches And Guides

Courtesy of BMW OF NORTH AMERICA, INC.

Lever AV connection socket (1) with a suitable tool (2) upwards out of storage compartment (3).

Fig 3: Removing Lever AV Connection Socket Using Suitable Tool

Courtesy of BMW OF NORTH AMERICA, INC.

Disconnect plug connection (1).

Remove AV connection socket (2) upwards out of storage compartment (3).

Installation:

Locks (4) must not be damaged.

Make AV connection socket (1) is correctly seated in storage compartment (3).

Fig 4: Identifying AV Connection Socket And Plug Connection

Courtesy of BMW OF NORTH AMERICA, INC.